SF-Thread-Service
MATERIAL
17-4 STAINLESS H900
THREADS
1-3/8 (1.375”) x 24 TPI
Length
0.4”
TYPE(s)
Trainer-556
Trainer-762
Warden-556
Warden-762
FINISH
Cerakote
All Cerakote Selections will be applied to the rotating collar, as well as the shoulder behind the threads. (See Pictures)
Notes:
This is a “Send in” Service to modify a supplied Trainer/Warden to add a 1.375x24 Thread to the Exterior
No internal dimensions are machined or modified, unless otherwise requested via Email / Contact Form.
Wardens require a caliber specific muzzle device to be used for machining the thread, to ensure concentricity. Wardens can be used between calibers, but it is recommended that they are used with the caliber muzzle device they are machined with. Please specify via the drop down menu.
Every Trainer/Warden is checked with a 10” Standard, and alignment rod to ensure they are machined to spec.
SHIPPING
1075 N Tustin Street
Orange, CA 92863
PO Box #7448
MATERIAL
17-4 STAINLESS H900
THREADS
1-3/8 (1.375”) x 24 TPI
Length
0.4”
TYPE(s)
Trainer-556
Trainer-762
Warden-556
Warden-762
FINISH
Cerakote
All Cerakote Selections will be applied to the rotating collar, as well as the shoulder behind the threads. (See Pictures)
Notes:
This is a “Send in” Service to modify a supplied Trainer/Warden to add a 1.375x24 Thread to the Exterior
No internal dimensions are machined or modified, unless otherwise requested via Email / Contact Form.
Wardens require a caliber specific muzzle device to be used for machining the thread, to ensure concentricity. Wardens can be used between calibers, but it is recommended that they are used with the caliber muzzle device they are machined with. Please specify via the drop down menu.
Every Trainer/Warden is checked with a 10” Standard, and alignment rod to ensure they are machined to spec.
SHIPPING
1075 N Tustin Street
Orange, CA 92863
PO Box #7448
MATERIAL
17-4 STAINLESS H900
THREADS
1-3/8 (1.375”) x 24 TPI
Length
0.4”
TYPE(s)
Trainer-556
Trainer-762
Warden-556
Warden-762
FINISH
Cerakote
All Cerakote Selections will be applied to the rotating collar, as well as the shoulder behind the threads. (See Pictures)
Notes:
This is a “Send in” Service to modify a supplied Trainer/Warden to add a 1.375x24 Thread to the Exterior
No internal dimensions are machined or modified, unless otherwise requested via Email / Contact Form.
Wardens require a caliber specific muzzle device to be used for machining the thread, to ensure concentricity. Wardens can be used between calibers, but it is recommended that they are used with the caliber muzzle device they are machined with. Please specify via the drop down menu.
Every Trainer/Warden is checked with a 10” Standard, and alignment rod to ensure they are machined to spec.
SHIPPING
1075 N Tustin Street
Orange, CA 92863
PO Box #7448